SAME DAY SHIPPING ON ORDERS PLACED BY 4 PM | 877-4-SPRUCE

A-701 VALSPAR PRIMER YELLOW

$18.75/Each
Part# 09-02128
MFR Model# 069.000A701.076

Overview

Maximum adhesion to bare aluminum and steel Tempo's Zinc Phosphate Primers are recommended for priming bare metal. These primers provide maximum bonding to bare aluminum and steel. Tempo's Primers have been the workhorse in the aviation industry for many years.

The A-701 Yellow and A-702 Green Zinc Phosphate Primers meet the performance standards outlined in Federal Specification T-P-1757A. They also exceed the 800 hours of salt spray fog test (ASTM #B117).
A-701 will replace A-901 Yellow and A-702 will replace A-902 Green.

Aircraft Primers - Zinc Phosphate

Color
Color No. Part No.
Yellow (12 oz.) A-701 09-02128
Green (12 oz.) A-702 09-02127
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reviews

Works well, no reported problems.

Paul K Verified Purchase

A-701 VALSPAR PRIMER YELLOW

August 26, 2021

Great stuff

Hs N Verified Purchase

A-701 VALSPAR PRIMER YELLOW

July 8, 2021

Perfect for repainting.

John R
April 18, 2021

Good service.

Steve
April 2, 2021

Good coverage, quick recoat time, and less odour and toxicity than zinc chromate and other self-etch primers. Paint does aerosilize resulting in overspray “dust” on surrounding surfaces, so be sure to spray in well-ventilated areas and cover up flat surfaces in the immediate work area.

Sean M
March 12, 2021

worked great, good coverage

George P
October 6, 2020

Working great for touch up of my Beechcrafts OEM corrosion proofing.

Craig
October 5, 2020

No issues spraying. Convenient and did the job.

Dave M
September 29, 2020

Good coverage, no clogs, made sure to shake for 2 mins and used at 84 degrees. Expensive to ship tho

James B
September 1, 2020

Quality product.

Russ J
August 24, 2020

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Does the A-702 have a shelf life?

The shelf life for item number A-702 (09-02127) is 3 years. All Plasti-kote and Tempo products have a 3 year shelf life.

Q: Is Tempo A-702 Zinc Phosphate Primer able to be used under Poly-Tak fabric cement? I see it's a modified epoxy product and it doesn't seem to affect the dried primer on a test piece. Thank you, Wayne

In the past Poly Fiber has told us to only use Poly Tak over epoxy primers, so I would say no, unless Poly Fiber tells you something different for your application.

Q: What is optimum coverage? I am using the green and it seems to take 4 coats or more to get a solid green color, but is it necessary to go that thick? I don't mind seeing an uneven coat as long as it provides protection. Also the fewer coats the less weight, not to mention less $$ in primer.

It doesn't say in the instructions, but in general, an acid etch primer like this does not require it to be a solid color, just coat the material and it will etch it.

Q: What kind of surface prep is required? Do I need to use an etchant before using this product?

This is a self etching primer and intended to be used on bare metals. An etch is not needed.

Q: What kind of surface prep is required? Do I need to use an etchant before using this product?

This is a self etching primer and intended to be used on bare metals. An etch is not needed.

Q: Is this primer to promote adhesion of a top coat or corrosion protection or both? Will it provide corrosion protection without a top coat?

This is a zinc phosphate self etching primer. It does help adhesion, but more commonly used for corrosion protection without a top coat. commonly used on aluminum interior parts.

Q: Other than color, any differences between the yellow and green Tempo zinc phosphate aviation primer? Read anecdotal write-ups that yellow goes on smoother ... fact or fiction?

We are unaware of any other difference besides the color. We sell twice a much of the green than the yellow primer.

Q: For surface prep, other primers require a light sanding after cleaning. The instructions on the spray can only indicate that the surface should be clean, dry, and free of dust. Is light sanding required or recommended? Thanks

Per the supplier: This will depend if the surface you are planing on putting this product on is smooth or rough. If the surface is rough, then a light sanding will be recommended.

Q: To clarify the surface prep question, clean, dry, smooth aluminum sheet used for skins should not be sanded prior to application?

Correct, as per vendor, this seems to be more of a personal opinion. If the surface is smooth enough with no rough spots then it would not need to be lightly sanded. It will only needed to be lightly sanded if what you are spraying the primer on is rough, to sand down the rough spots to make it smooth.

Q: I just painted my first item with this primer. It is a mild steel bracket that was prepped with scotch bright and Acetone. After half a day of drying, it is still very tacky to the touch. Is this normal?

Per the supplier: This may be depending on what the weather conditions are like. Please review the tech data sheet which is linked in the "Documents" tab of this web page for more information.

View in Catalog

View Image View in Catalog