Nominal Length |
Grip Length |
Part Number | Drilled | Undrilled |
---|---|---|---|---|
3/4 | 3/16 | AN46-6 | $28.50 | -- |
7/8 | 5/16 | AN46-7 | $11.50 | $13.50 |
1-3/8 | 13-16 | AN46-13 | $31.90 | -- |
1-1/2 | 5/16 | AN46-14A | -- | $24.65 |
1-5/8 | 1-1/16 | AN46-15 | $23.50 | $22.50 |
1-3/4 | 1-3/16 | AN46-16 | $12.65 | -- |
1-7/8 | 1-5/16 | AN46-17 | $21.50 | $16.90 |
2 | 1-7/16 | AN46-20 | $16.70 | $15.50 |
2-1/8 | 1-9/16 | AN46-21 | $16.50 | -- |
2-1/4 | 1-11/16 | AN46-22 | -- | $24.95 |
2-3/8 | 1-13/16 | AN46-23 | -- | $37.50 |
2-5/8 | 2-1/16 | AN46-25 | $31.50 | $28.50 |
2-3/4 | 2-3/16 | AN46-26 | $19.50 | $16.55 |
2-7/8 | 2-5/16 | AN46-27 | $19.75 | -- |
3 | 2-7/16 | AN46-30 | $34.70 | -- |
3-37/64 | 2-15/16 | AN46-34A | -- |
Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devices as a turnbuckle fork, a clevis or a cable shackle. Manufactured and plated in same manner as AN3 - AN8 bolts . Minimum tensile strength 125, 000 PSI . Eye bolts will be furnished with either drilled or undrilled shank subject to stock on hand. Add letter "A" after dash number for undrilled shank.
Shank 3/8" Hole 3/8" Thread 3/8-24. For "Undrilled" use "A" at end of part number. |
The hole has a diameter range between .375"-.378".
The nominal length is measured from the bottom of the head to the end of the bolt itself.