This 12 point, full ratchet crimping tool terminates precision BNC connectors in size RG 55,58,59,62,141,142,223,303 and 400. This crimper is built to MS22520 specifications and die set is included with the crimper.
Tool worked well reasonably priced, no instructions came with the tool, study how to use it prior to wasting a coax pin.. coax pins are not sold separately. If you ruin the pin you will have to buy a new connector assembly.
Good, solid tool but no instructions included, made in Taiwan.
First crimp with a new out of the box crimper. Installing the center pin the crimp failed, center pin pulled off. This not where I wanted to be with a new tool. Frustrating.
The crimper comes with 1 die that works with the listed cables and connectors. The dies are screwed in.
Both the pin and barrel can be crimped using this tool.
The same die is used for all of the RG cables listed. The die consists of a .213, .255, and .068 inch cavities. This will crimps pins and coax for RG 58, 142 and 400.
No, this ships as the tool only with no manual.
This will work for those connectors. This is the crimper our harness shop uses for our coax assemblies.
Yes this crimper is calibrated at the factory and can be set in to be calibrated.