THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-4-SPRUCE

POLY FIBER R65-75 REDUCER GALLON

$62.80/Gallon
Part# 09-04800
MFR Model# 2-65

Overview

A blend of solvents used for viscosity and drying control of Poly-Brush, Poly-Spray and Poly-Tone. Blend #R-65-75 is recommended as the standard reducer in normal weather, 65°75°F. #RR-8500 is a retarder-reducer with slower drying time. Recommended for temp above 85° & warm humid weather.
Important Notice: All mixed paints are special order and are non-returnable.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Documents

  • Frequently Purchased With
  • Customers Also Viewed

Reviews

Keep the cap screwed down tight or it will evaporate away. Keep them in a dry place, too, as one wee rust spot and it will evaporate through that too.

Gelston A Verified Purchase

POLY FIBER R65-75 REDUCER GALLON

September 15, 2023

Very good

Joseph E Verified Purchase

POLY FIBER R65-75 REDUCER GALLON

October 4, 2022

Used about 10% more than called for with my hvlp turbine setup. Helped the flow and results were great.

Brett B Verified Purchase

POLY FIBER R65-75 REDUCER GALLON

May 5, 2022

Brett B Verified Purchase

POLY FIBER R65-75 REDUCER GALLON

January 17, 2022

Stephen S Verified Purchase

POLY FIBER R65-75 REDUCER GALLON

December 10, 2021

i bought a taylorcraft envelpoe that didnt fit my aircraft. AS did nothing about it. Not happy

Montgomery S Verified Purchase

POLY FIBER R65-75 REDUCER GALLON

October 12, 2021

So far, so good! Needed the reducer to thin PolyBrush and that is still a couple weeks in the future. Not necessary this time, but thanx for the fast shipping. Just wish the reducer was not QUITE so $$$$$!!

Bruce E Verified Purchase

POLY FIBER R65-75 REDUCER GALLON

August 21, 2021

Aircraft Spruce, you responded again, and very quickly I might add. Much appreciated. Thanks for being there when we need you the most. Even little things like this, that will hold up a project if not responded to quickly, are taken care of routinely by you folks!! That is why we will continue to use Aircraft Spruce!!

Norris W
October 29, 2020

Pure and stable reducer, any product that stands up to my personal saying SAY WHAT YOU DO AND DO WHAT YOU SAY Has my vote.

Alan
July 2, 2020

I use this for RC Airplanes. It works perfectly, along with poly brush, on the fabric covering.

Keith D
April 20, 2020

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: What is the recommended mix for Stits R6575 to Poly Tone for spraying with a HVLP gun?

You would use a 3:1 Mix Ratio. 3 Poly Tone, 1 R65-75 Reducer.

View in Catalog

View Image View in Catalog