THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-4-SPRUCE

Matco Diecast Internal Caliper Wheels W600Cc.75R

$949.00/Pair
Part# 06-00491
MFR Model# WHLW600CC.75R

Overview

W600CC.75R

MATCO mfg produces a superior 6 inch wheel and brake assembly for use with aircraft requiring less than 1185 lbs per wheel. This model uses 0.75 inch TAPER/ROLL bearings. (Check the product comparison table for other bearing and caliper configurations).

Dimensions

The W600CC.75R is a 6 inch wheel with 5.38 inch width with an additional 1.75 inch caliper spacing. Bearing spacing is 4 inches and axle spacing is 1 inches. The total weight of this wheel and brake assembly is 5.03 pounds. The bearing axle diameter is 0.75 inches.


Performance
The W600CC.75R is designed for the following standards:
Static Capacity: 1185 LBS
Load Limit: 3560 LBS
Maximum Accelerate/Stop Kinetic Energy: 93441 ft-lb
Torque Rating (@450 PSI): 1540 in-lb
Product Comparison Table
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reviews

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

View in Catalog

View Image View in Catalog