|New Super Seam Fabric Cement. Not compatible with original nitrate-based Super Seam. Used to attach Ceconite Fabric to structures. High solids nitrate based cement approved in the Ceconite STC.|
good used before
SUPER SEAM FABRIC CEMENT QUART
Please note, California Power Systems's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. California Power Systems assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, Super Seam can be used to attach dacron to aluminum or other metals. Sure Seam is a very similar product just manufactured by a different company.
No, this is not heat activated.
Yes. MEK can be used to thin Super Seam cement.
Yes, Super Seam Cement can be used with Dacron fabric.
Yes, Super Seam can be used for this as long as it is recognized the strength of the bond is shear and not peel.
There isnt a minimum temp. The colder it is the longer it will take to cure.
Yes ekobond will glue Dacron to Dacron.
Poly-tak is the recommended fabric glue for the Poly Fiber system.
Yes this will work as long as the rings are plastic.
If it is used sparingly, yes. It needs access to air to dry.