With Heat Pack option adds a shipping heat pack to keep the material from freezing while in transit. It is recommended for winter months / destinations in cold climates where the temperature may drop below freezing while in transit. If the material freezes, it is not recommended for use.
Stewart Systems EkoEtch EkoEtch Aluminum Etch is a concentrated combination acid based detergent and degreaser. EkoEtch removes scale, corrosion, light oil, processing fluids and brightens aluminum. EkoEtch is non-hazardous, water reducible and non-flammable. Use EkoEtch to prepare both old and new aluminum surfaces before applying Stewart Systems EkoPrime or EkoPoxy Primer/Sealers. On old aluminum it is recommended to clean the surfaces first with Stewart Systems EkoClean. Once the surface has been treated with EkoClean, it should be primed within 8 hours for maximum corrosion protection. Available in Quarts only
* Excellent lime remover
* Excellent scale remover
* Excellent soap film remover
* Can be applied in a wide
variety of temperature/
* Water is used for clean-up
* Shelf life of 1+ years
A good product, quickly etches the metals surface. Works well in conjunction with the de-greaser. Follow the instructions on the bottle and be sure to pressure wash parts to remove the etching material.
April 27, 2020
Q: Can the Stewart Systems Ekotech Aluminum Etch / Cleaner be used to clean old paint to be painted over?
Per Vendor: No, this product is only used for aluminum. The product you are looking for is the EKOClean. P/N# 09-03089 (Quart) or P/N# 09-03090 (Gallon).